In sheet metal processing, should we all know and understand the related drawings?
This question, in the view of Ruiyi, the manufacturer of sheet metal hand processing, the answer is very positive, that is, the relevant drawings of sheet metal processing must be clearly known, otherwise, it cannot be processed. In addition, this can also ensure the effect and quality of sheet metal processing, and further avoid some problems, or avoid unnecessary troubles, thereby affecting the use of the product.

2. How to determine the bending factor in sheet metal processing in terms of the bending factor? Are there any relevant factors?
In sheet metal processing, for the operation of bending, it has the parameter of bending coefficient. Moreover, this is an important parameter, so we should pay attention to it and not take it lightly. As for the relevant factors, there are three factors related to material thickness, bending requirements and bending equipment. Moreover, it is generally an empirical value and cannot be accurately calculated.

3. If the sheet metal parts obtained after sheet metal processing have burrs, must they be removed?
If the sheet metal parts obtained after sheet metal processing have burrs, whether to remove them depends on the specific parts that appear and whether they will affect the assembly and use of the workpiece. If it will affect the subsequent processing or assembly, or it will scratch the user, then it must be removed; otherwise, if there is no effect, it can be removed.

Sheet Metal Processing is professional, if you need, please send email to wuxingrui@ruiyimodel.com